H3C S7500 Series Operation Manual page 49

Operation Manual – Login
H3C S7500 Series Ethernet Switches
Set the maximum number of
lines the screen can contain
Set the history command buffer
size
Set the timeout time for the user
interface
Note that the command level available to users logging into a switch depends on both
the authentication-mode none command and the user privilege level level
command, as listed in the following table.
To do...
Chapter 2 Logging in through the Console Port
Use the command...
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
2-7
Remarks
Optional
By default, the screen
can contain up to 24
lines.
You can use the
screen-length 0
command to disable
the function of
displaying information
in pages.
Optional
The default history
command buffer size is
10. That is, a history
command buffer can
store up to 10
commands by default.
Optional
The default timeout
time of a user interface
is 10 minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated
if no operation is
performed in the user
interface within 10
minutes.
You can use the
idle-timeout 0
command to disable
the timeout function.