H3C S7500 Series Operation Manual page 786

Operation Manual – SNMP and RMON
H3C S7500 Series Ethernet Switches
Set system information
Set a
communi
ty name
and
access
right
Set the maximum size of a
SNMP packet that the agent
can send/receive
Set the device engine ID
Create or update the view
information
Follow these steps to configure SNMP basic functions (SNMPv3):
To do...
Direct Set a
configu commun
ration ity name
Set an
SNMP
group
Indirect
configu
ration
Add a
new
user to
an
SNMP
group
Use the command...
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c |
v3 }* | all } }
snmp-agent
community { read |
write } community-name
[ acl acl-number |
mib-view view-name ]*
snmp-agent group { v1
| v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view
notify-view ] [ acl
acl-number ]
snmp-agent usm-user
{ v1 | v2c } user-name
group-name [ acl
acl-number ]
snmp-agent packet
max-size byte-count
snmp-agent
local-engineid engineid
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
1-4
Chapter 1 SNMP Configuration
Remarks
Required
By default, the contact
information for system
maintenance is
"Hangzhou H3C
Technologies Co., Ltd.
", the physical location
is "Hangzhou China",
and the SNMP version
is SNMPv3.
Required
In
configuration,
SNMPv1
SNMPv2c
community names
are set directly.
In indirect
configuration,
SNMPv3 syntax is
adopted, and the
added user
equal to
community
for SNMPV1 and
SNMPV2C.
You can choose
either of them as
required.
Optional
By default, it is 2,000
bytes.
Optional
By default, the device
engine ID is
"enterprise number +
device information".
Optional
By default, the view
name is ViewDefault
and OID is 1.
direct
and
is
the
name