Displaying Port Isolation Configuration; Port Isolation Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – Port Isolation
H3C S7500 Series Ethernet Switches
Specify a description
string for the current
isolation group
Add the specified port into
the isolation group
Enter Ethernet port view
Add the current Ethernet
port to the specified
isolation group
Note:
An Ethernet port belongs to only one port isolation group. If you add an Ethernet port
to different isolation groups, the port belongs to only the latest isolation group to
which the port is added.
Currently, cards of Type A (LS81FT48A, LS81FM24A, LS81FS24A, LS81GB8UA,
and LS81GT8UA) do not support the Port Isolation feature.

1.3 Displaying Port Isolation Configuration

Display the configuration of
the created isolation group

1.4 Port Isolation Configuration Example

I. Network requirements
PC 2, PC 3 and PC 4 connect to the switch ports Ethernet 2/0/2, Ethernet 2/0/3,
and Ethernet 2/0/4 respectively.
It is desired that PC 2, PC 3 and PC 4 are isolated from each other so that they
cannot communicate with each other.
To do...
description text
port interface-list
interface interface-type
interface-number
port isolate group
group-id
To do...
Chapter 1 Port Isolation Configuration
Use the command...
Use the command...
display isolate port
[ group group-id ]
1-2
Remarks
Optional
Optional
By default, an isolation
group contains no
Ethernet port.
—
Optional
By default, an isolation
group contains no
Ethernet port.
Remarks
Available in any view.