File System Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – File System Management
H3C S7500 Series Ethernet Switches
Enter system view
Set the file system prompt
mode

1.1.8 File System Configuration Example

# Display all the files in the root directory of the file system on the local unit.
<H3C> dir /all
Directory of flash:/
0 -rw-
1 -rw-
2 -rw-
3 -rw-
4 drw-
5 drw-
6 -rw-
7 -rw-
8 -rw-
31877 KB total (15876 KB free)
# Create a directory named "test".
<H3C> mkdir test
.
%Created dir flash:/test.
# Copy flash:/config.cfg as flash:/test/1.cfg.
<H3C> copy flash:/config.cfg flash:/test/1.cfg
......
%Copy file flash:/config.cfg to flash:/test/1.cfg...Done.
# Display the file information.
<H3C> dir /all
Directory of flash:/
0 -rw-
1 -rw-
2 -rw-
3 -rw-
To do...
system-view
file prompt { alert |
quiet }
4 Mar 09 2006 13:59:19
16215134 Apr 04 2006 16:36:20
483 Apr 20 2006 14:50:54
3980 Apr 21 2006 15:08:29
- Apr 16 2006 11:18:17
- Apr 10 2005 19:07:59
11779 Apr 05 2006 10:23:03
19307 Apr 16 2006 11:15:55
66 Apr 05 2006 11:32:28
4 Mar 09 2006 13:59:19
16215134 Apr 04 2006 16:36:20
483 Apr 20 2006 14:50:54
3980 Apr 21 2006 15:08:29
Chapter 1 File System Management
Use the command...
1-6
Remarks
—
Required
By default, the file system
prompt mode is alert.
snmpboots
S7500-VRP310-E3128.app
diaginfo.txt
config.cfg
hj
dd
test.bak
1.txt
temp1
snmpboots
S7500-VRP310-E3128.app
diaginfo.txt
config.cfg