H3C S7500 Series Operation Manual page 905

Operation Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Note:
You can configure the IP address for any VLAN on the switch for FTP transmission.
However, before configuring the IP address for a VLAN interface, you have to make
sure whether the IP addresses of this VLAN and PC are routable.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface Vlan-interface 1
[H3C-Vlan-interface1] ip address 192.168.0.75 255.255.255.0
Step 3: Enable FTP service on the switch, configure the FTP user name to test,
password to pass, and directory to FLASH root directory.
[H3C-Vlan-interface1] quit
[H3C] ftp server enable
[H3C] local-user test
New local user added.
[H3C-luser-test] password simple pass
[H3C-luser-test] service-type ftp ftp-directory flash:/
Step 4: Enable FTP client software on PC. Refer to
interface in Windows operating system.
Figure 1-10 Command line interface
Chapter 1 Boot ROM and Host Software
Figure 1-10
1-15
Loading
for the command line