H3C S7500 Series Operation Manual page 975

Hide thumbs Also See for S7500 Series:

Table of Contents

Operation Manual – NAT, Netstream, Policy Routing

H3C S7500 Series Ethernet Switches

# At the end connecting with the Internet, create VLAN 10 and VLAN-interface 10, and

configure the interface IP address.

[H3C] vlan 10

[H3C-vlan10] port ethernet3/0/1

[H3C-vlan10] quit

[H3C] interface vlan-interface 10

[H3C-vlan-interface10] ip address 200.18.2.2 255.255.255.252

# Configure an ACL rule.

[H3C] acl number 2000

[H3C-acl-basic-2000] rule 0 permit source any

# Configure a NAT address pool with the identifier of 0.

[H3C] nat address-group 0 200.18.2.3 200.18.2.5

# Associate the ACL with the address pool.

[H3C] interface vlan-interface 10

[H3C-vlan-interface10] nat outbound 2000 address-group 0 slot 3

Chapter 1 NAT Configuration

Chapters

Table of Contents