Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches
Table 2-4 Determine the command level
Authentication
mode
None
(authentication-
mode none)

2.4.2 Configuration Example

I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the console port:
Do not authenticate users logging in through the console port.
Commands of level 2 are available to users logging into the AUX user interface.
The baud rate of the console port is 19,200 bps.
The screen can contain up to 30 lines.
The history command buffer can contain up to 20 commands.
The timeout time of the AUX user interface is 6 minutes.
II. Network diagram
User PC running Telnet
Figure 2-5 Network diagram for AUX user interface configuration (with th
authentication mode being none)
III. Configuration procedure
# Enter system view.
<H3C> system-view
Scenario
User type
The user privilege level level
Users
command is not executed
logging in
through
The user privilege level level
console ports
command is already executed
Ethernet
2-8
Chapter 2 Logging in through the Console Port
Command configuration
Ethernet1/0/1
Command
level
Level 3
Determined
by the level
argument
e