Error Messages; Command Edit - H3C S7500 Series Operation Manual

Operation Manual – CLI
H3C S7500 Series Ethernet Switches
Note:
As the Up and Down keys have different meanings in HyperTerminal running on
Windows 9x, these two keys can be used to recall history commands only in
terminals running Windows 3.x or Telnet running in Windows 3.x. You can press
<Ctrl + P> or <Ctrl + N> in Windows 9x to achieve the same purpose.
If you enter and execute the same command successively for multiple times, only
the first command is saved in the CLI as a history command.

1.3.4 Error Messages

If the command you enter passes the syntax check, it will be successfully executed;
otherwise, an error message will appear.
Table 1-4 Common error messages
Unrecognized command
Incomplete command
Too many parameters
Ambiguous command
Wrong parameter found at '^'
position.

1.3.5 Command Edit

The CLI provides basic command edit functions and supports multi-line editing. The
maximum number of characters a command can contain is 256.
edit operations.
Table 1-5 Edit operations
A common key
Error message
Press...
Insert the character the key represents at the cursor and
move the cursor one character to the right if the edit
buffer is not full.
Table 1-4 lists the common error messages.
Remarks
The command does not exist.
The keyword does not exist.
The parameter type is wrong.
The parameter value is out of range.
The command entered is incomplete.
You have entered too many parameters.
The parameters entered are ambiguous.
The parameter labeled by '^' is unrecognizable.
To...
1-15
Chapter 1 CLI Overview
Table 1-5 lists the CLI