H3C S7500 Series Operation Manual page 590

Operation Manual – VRRP-HA
H3C S7500 Series Ethernet Switches
II. Network diagram
VLAN-Interface3:
10.100.10.2
LSW A
VLAN-Interface2:
202.38.160.1
Figure 1-3 Network diagram for single-VRRP backup group configuration
III. Configuration procedure
Configure Switch A.
# Configure VLAN 2.
<LSW-A> system-view
[LSW-A] vlan 2
[LSW-A-vlan2] port Ethernet 2/0/6
[LSW-A-vlan2] quit
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] ip address 202.38.160.1 255.255.255.0
[LSW-A-Vlan-interface2] quit
# Enable a backup group to respond to ping operations destined for its virtual router IP
address.
[LSW-A] vrrp ping-enable
# Create a backup group.
[LSW-A] interface vlan 2
[LSW-A-Vlan-interface2] vrrp vrid 1 virtual-ip 202.38.160.111
# Set the priority for the backup group.
Host B
10.2.3.1
Internet
Virtual IP address 2
02.38.160.111
202.38.160.3
Host A
1-10
Chapter 1 VRRP Configuration
LSW B
VLAN-Interface2:
202.38.160.2