Operation Manual – PoE
H3C S7500 Series Ethernet Switches
Chapter 2 PoE PSU Supervision Configuration
When configuring PoE PSU supervision, go to these sections for information you are
interested in:
Introduction to PoE PSU Supervision
AC Input Alarm Thresholds Configuration
DC Output Alarm Threshold Configuration
Displaying PoE Supervision Information
PoE PSU Supervision Configuration Example
2.1 Introduction to PoE PSU Supervision
The PoE-enabled S7500 series can monitor the external PoE power supply units
(PSUs) through SRPUs.
Complete these tasks to configure PoE PSU supervision:
AC Input Alarm Thresholds Configuration
DC Output Alarm Threshold Configuration
Note:
The PSE performance will be affected by fast switching of PoE PSUs. The interval of
switching PoE PSUs must be greater than five seconds.
2.2 AC Input Alarm Thresholds Configuration
You can set the AC input alarm thresholds for the PoE PSUs to enable the S7500
series to monitor the AC input voltages of the PSUs in real time through SRPUs.
2.2.1 Configuring AC Input Alarm Threshold
Follow these steps to configure AC input alarm thresholds:
Chapter 2 PoE PSU Supervision Configuration
Task
2-1
Remarks
Required
Required