Enabling Information Output To A Log Host - H3C S7500 Series Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches
Table 1-3 Information channel names and numbers
Output direction
Console
Monitor terminal
Log host
Trap buffer
Log buffer
SNMP
Note:
Settings for the six output directions are independent of one another. However, for any
output direction, you must first enable the information center function to make all other
settings effective.
The information center of the Ethernet switch features:
Supporting six information output directions, namely, console (console), monitor
terminal (monitor), log host (loghost), trap buffer (trapbuffer), log buffer (logbuffer)
and SNMP (snmp agent).
Filtering information by information severity (information is divided into eight
severity levels).
Filtering information by modules where information is generated.
Language options (Chinese or English) for information output to a log host.

1.2.1 Enabling Information Output to a Log Host

Follow these steps to enable information output to a log host:
Enter system view
Enable the information
center
0
1
2
3
4
5
To do...
system-view
info-center enable
Channel number
Use the command...
1-6
Chapter 1 Information Center
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
Remarks
—
Optional
By default, the information
center is enabled.