Configuration Example; Configuring Guaranteed Bandwidth; Configuration Prerequisites - H3C S7500 Series Operation Manual

Operation Manual – QoS
H3C S7500 Series Ethernet Switches
Enter system view
Enter Ethernet port
view
Enter QoS view
Clear the statistics of
the traffic matching the
specified ACL rules
acl-rule: Applied ACL rules which can be the combination of various ACL rules. Type-A
LPUs' way of combination is described in
combination is described in

1.11.4 Configuration Example

A switch is connected to 10.1.1.1/24 network segment through its Ethernet 2/0/1
port.
Collect statistics on traffic from the 10.1.1.1/24 network segment
Configuration procedure:
<H3C> system-view
[H3C] acl number 2000
[H3C-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[H3C-acl-basic-2000] quit
[H3C] interface Ethernet2/0/1
[H3C-Ethernet2/0/1] qos
[H3C-qoss-Ethernet2/0/1] traffic-statistic inbound ip-group 2000

1.12 Configuring Guaranteed Bandwidth

The guaranteed bandwidth feature is to provide the maximum available bandwidth and
minimum guaranteed bandwidth for the specified traffic to get the corresponding
service.

1.12.1 Configuration Prerequisites

ACL rules used for traffic identifying are defined. Refer to the ACL module in this
manual for defining ACL rules.
The parameters for the guaranteed bandwidth are specified.
To do... Use the command...
system-view
interface
interface-type
interface-number
qos
reset traffic-statistic
{ inbound |
outbound } acl-rule
[ system-index ]
reset traffic-statistic
inbound acl-rule
[ system-index ]
Table
—
—
—
Required
Type-A LPUs support this
command.
Required
Non-type-A LPUs support this
command.
Table 1-9, and non-type-A LPUs' way of
1-10.
1-28
Chapter 1 QoS Configuration
Remarks