H3C S7500 Series Operation Manual page 52

Operation Manual – Login
H3C S7500 Series Ethernet Switches
To do...
Configur
e the
console
port
Configure the
command level
available to users
logging into the user
interface
Make terminal
services available to
the user interface
Set the maximum
number of lines the
screen can contain
Set history command
buffer size
Use the command...
Set the
speed speed-value
baud rate
Set the
parity { even | mark |
check
none | odd | space }
mode
Set the
flow-control
flow
{ hardware | none |
control
software }
mode
Set the
stopbits { 1 | 1.5 | 2 }
stop bits
Set the
databits { 7 | 8 }
data bits
user privilege level
level
shell
screen-length
screen-length
history-command
max-size value
2-10
Chapter 2 Logging in through the Console Port
Remarks
Optional
The default baud rate of an AUX
port (also the console port) is
9,600 bps.
Optional
By default, the check mode of a
console port is set to none, that
is, no check bit.
Optional
By default, a console port does
not perform flow control.
Optional
The default stop bits of a console
port is 1.
Optional
The default data bits of a console
port is 8.
Optional
By default, commands of level 3
are available to users logging into
the AUX user interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function
of displaying information in pages.
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.