Isolate-User-Vlan Configuration; Isolate-User-Vlan Configuration Task List; Configuring Isolate-User-Vlan; Configuring Secondary Vlan - H3C S7500 Series Operation Manual

Operation Manual – Extended VLAN Application
H3C S7500 Series Ethernet Switches

2.2 Isolate-User-VLAN Configuration

2.2.1 Isolate-User-VLAN Configuration Task List

Complete the following tasks to configure Isolate-user-VLAN:

Configuring Isolate-User-VLAN

Configuring Secondary VLAN

Adding Ports to Isolate-User-VLAN and Secondary VLAN
Configuring Mapping Between Isolate-User-VLAN and Secondary
VLAN
2.2.2 Configuring Isolate-User-VLAN
Follow these steps to configure an isolate-user-VLAN:
Enter system view
Create a VLAN and enter VLAN view
Configure the VLAN as an
isolate-user-VLAN
Caution:
Multiple isolate-user-VLANs can be configured for a switch.
With GVRP function enabled, a switch cannot be enabled with isolate-user-VLAN
function.
Isolate-user-VLANs do not forward multicast service data.
You cannot enable both the isolate-user-VLAN function and super VLAN function
for a VLAN. If a VLAN is specified as an isolate-user-VLAN or a secondary VLAN,
you cannot configure it as a super VLAN or a sub VLAN additionally.
2.2.3 Configuring Secondary VLAN
Configuring a secondary VLAN is the same as configuring an ordinary VLAN.
Follow these steps to configure a secondary VLAN:
Task
To do...
2-3
Chapter 2 Isolate-User-VLAN Configuration
Use the command...
system-view
vlan vlan-id
isolate-user-vlan enable
Remarks
Required
Required
Required
Required
Remarks
—
Required
Required