Displaying And Maintaining A Cluster; Cluster Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
Switch between the
management device view
and a member device
view

1.5 Displaying and Maintaining a Cluster

Display the global NDP
configuration (including the
interval to send NDP
packets and the holdtime)
Display the information
about the neighbors
discovered by NDP and
connected to specified ports
Display the global NTDP
information
Display device information
collected through NTDP
Display state and statistics
information about a cluster
Display the information
about the candidate devices
of a cluster
Display the information
about the cluster members
Clear the NDP statistics on
a port

1.6 Cluster Configuration Example

1.6.1 Cluster Configuration Example
I. Network requirements
Three switches form a cluster, in which:
The management device is an S7500 switch.
The rest are member devices.
To do...
cluster switch-to
{ member-number |
mac-address H-H-H |
administrator }
To do...
Use the command...
Use the command...
display ndp
display ndp interface port-list
display ntdp
display ntdp device-list
[ verbose ]
display cluster
display cluster candidates
[ mac-address H-H-H | verbose ]
display cluster members
[ member-number | verbose ]
reset ndp statistics [ interface
port-list ]
1-13
Chapter 1 Cluster
Remarks
Optional
Switch between the
management device view
and the member device
view
Remarks
Optional
Available in
any view
—