H3C S7500 Series Operation Manual page 863

Hide thumbs Also See for S7500 Series:

Table of Contents

Operation Manual – FTP and TFTP

H3C S7500 Series Ethernet Switches

If the available space of the flash of the switch is not enough to hold the file to be

uploaded, you need to delete the existing applications in the flash and then upload new

applications to the flash of the switch.

# Download the switch application named switch.bin from the TFTP server to the

<H3C> tftp 1.1.1.2 get switch.bin switch.bin

# Upload the switch configuration file named config.cfg to the TFTP server.

<H3C> tftp 1.1.1.2 put config.cfg config.cfg

# Use the boot boot-loader command to specify the downloaded file (switch.bin) to be

the startup file used when the switch starts the next time, and restart the switch. Thus

the switch application is upgraded.

<H3C> boot boot-loader switch.bin

<H3C> reboot

For information about the boot boot-loader command and how to specify the startup

file for a switch, refer to the "System Maintenance and Debugging" part module of this

Chapter 1 FTP and TFTP Configuration

Chapters

Table of Contents