H3C S7500 Series Operation Manual page 66

Operation Manual – Login
H3C S7500 Series Ethernet Switches
Set the maximum number
of lines the screen can
contain
Set the history command
buffer size
Set the timeout time of the
user interface
Note that if you configure to authenticate the users in the password mode, the
command level available to users logging into a switch depends on both the
authentication-mode password command and the user privilege level level
command, as listed in
To do...
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
Table 3-5.
Chapter 3 Logging in through Telnet
Use the command...
3-7
Remarks
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0
command to disable the
function of displaying
information in pages.
Optional
The default history
command buffer size is
10. That is, a history
command buffer can store
up to 10 commands by
default.
Optional
The default timeout time
of a user interface is 10
minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated if
no operation is performed
in the user interface within
10 minutes.
You can use the
idle-timeout 0 command
to disable the timeout
function.