Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – QoS
H3C S7500 Series Ethernet Switches
Enter QoS view
Configure the queue
scheduling mode
Display the
parameters for traffic
redirect
Display all the QoS
settings on the port
Note:
Only non-type-A LPUs support the configuration for the queue scheduling algorithm.

1.9.3 Configuration Example

The switch adopts the WRR queue scheduling algorithm, and the weight values of
output queues are 10, 5, 10, 10, 5, 10, 5, and 10 respectively;
Display the configuration.
Configuration procedure:
<H3C> system-view
[H3C] interface GigabitEthernet2/0/1
[H3C-GigabitEthernet2/0/1] qos
[H3C-qosb-GigabitEthernet2/0/1] queue-scheduler wrr 10 5 10 10 5 10 5 10
[H3C-qosb-GigabitEthernet2/0/1] display qos-interface GigabitEthernet 1/0/1
queue-scheduler
GigabitEthernet2/0/1:
Queue scheduling mode: weighted round robin
weight of queue 1: 10
weight of queue 2: 5
weight of queue 3: 10
weight of queue 4: 10
weight of queue 5: 5
weight of queue 6: 10
weight of queue 7: 5
To do...
qos
queue-scheduler { rr |
strict-priority | wrr
queue1-weight queue2-weight
queue3-weight queue4-weight
queue5-weight queue6-weight
queue7-weight queue8-weight }
display qos-interface
[ interface-type interface-number ]
queue-scheduler
display qos-interface
[ interface-type interface-number ]
all
Use the command...
1-24
Chapter 1 QoS Configuration
Remarks
—
Required
By default, the SP
queue scheduling
algorithm is adopted.
Optional
You can execute the
display command in
any view.