Protocol Specifications; Gvrp Configuration; Configuration Prerequisite - H3C S7500 Series Operation Manual

Operation Manual – GVRP
H3C S7500 Series Ethernet Switches
Table 1-1 Description of GVRP packet fields
Field
Protocol ID
Message
Attribute Type
Attribute List
Attribute
Attribute
Length
Attribute Event
Attribute Value
End Mark

1.1.4 Protocol Specifications

GVRP is defined in IEEE 802.1Q standard.

1.2 GVRP Configuration

The GVRP configuration tasks include configuring the GARP timers, enabling GVRP,
and configuring the GVRP port registration mode.

1.2.1 Configuration Prerequisite

The port on which GVRP will be enabled must be set to a trunk port.
1.2.2 Configuration Procedure
Follow these steps to configure GVRP:
Description
Protocol ID
Each message consists of two parts:
Attribute Type and Attribute List.
Defined by the specific GARP
application
It contains multiple attributes.
Each general attribute consists of
three parts: Attribute Length,
Attribute Event and Attribute Value.
Each LeaveAll attribute consists of
two parts: Attribute Length and
LeaveAll Event.
The length of the attribute
The event described by the attribute
The value of the attribute
End mark of the GVRP PDU.
1-4
Chapter 1 GVRP Configuration
Value
1
—
The attribute type of
GVRP is 0x01.
—
—
2 to 255
0: LeaveAll Event
1: JoinEmpty
2: JoinIn
3: LeaveEmpty
4: LeaveIn
5: Empty
The attribute value of
GVRP is the VID.
—