H3C S7500 Series Operation Manual page 56

Operation Manual – Login
H3C S7500 Series Ethernet Switches
Configure to
authenticate users
locally or remotely
using user name and
password
Configure
the
console
port
Configure the
command level
available to users
logging into the user
interface
Make terminal services
available to the user
interface
Set the maximum
number of lines the
screen can contain
To do... Use the command...
authentication-mode
scheme [ command-
authorization ]
Set the
speed speed-value
baud rate
Set the
parity { even | mark |
check
none | odd | space }
mode
Set the
flow-control
flow
{ hardware | none |
control
software }
mode
Set the
stopbits { 1 | 1.5 | 2 }
stop bits
Set the
databits { 7 | 8 }
data bits
user privilege level
level
shell
screen-length
screen-length
Chapter 2 Logging in through the Console Port
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
Users are authenticated locally
by default.
Optional
The default baud rate of the
AUX port (also the console port)
is 9,600 bps.
Optional
By default, the check mode of a
console port is set to none, that
is, no check bit.
Optional
By default, a console port does
not perform flow control.
Optional
The default stop bits of a
console port is 1.
Optional
The default data bits of a
console port is 8.
Optional
By default, commands of level 3
are available to users logging
into the AUX user interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function of displaying
information in pages.
2-14
Remarks