Creating An Isp Domain; Configuring The Attributes Of An Isp Domain - H3C S7500 Series Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
RADIUS scheme (radius-scheme): You can reference a configured RADIUS
scheme to implement AAA services. For the configuration of RADIUS scheme,
refer to
HWTACACS scheme (hwtacacs-scheme): You can reference a configured
HWTACACS scheme to implement AAA services. For the configuration of
HWTACACS scheme, refer to

1.3.2 Creating an ISP Domain

Table 1-5 Create an ISP domain
Enter system view
Create an ISP domain,
enter the view of an
existing ISP domain, or
configure the default ISP
domain

1.3.3 Configuring the Attributes of an ISP Domain

Table 1-6 Configure the attributes of an ISP domain
Enter system view
Create an ISP domain or
enter the view of an
existing ISP domain
Activate/deactivate the
ISP domain
Set the maximum number
of access users that can
be contained in the ISP
domain
Set the user idle-cut
function
RADIUS Configuration.
To do...
system-view
domain { isp-name |
default { disable | enable
isp-name } }
To do...
system-view
domain isp-name
state { active | block }
access-limit { disable |
enable
max-user-number }
idle-cut { disable |
enable minute flow }
Chapter 1 AAA & RADIUS & HWTACACS
HWTACACS Configuration.
Use the command...
Use the command...
1-14
Configuration
Remarks
—
Required
The default ISP domain is
system.
Remarks
—
Required
Optional
By default, once an ISP
domain is created, it is in
the active state and all
the users in this domain
are allowed to access the
network.
Optional
After an ISP domain is
created, the number of
access users it can
contain is unlimited by
default.
Optional
By default, user idle-cut
function is disabled.