Configuration Example; Qos Configuration Examples; Configuration Example Of Tp And Rate Limiting On The Port - H3C S7500 Series Operation Manual

Hide thumbs Also See for S7500 Series:

Table of Contents

Operation Manual – QoS

H3C S7500 Series Ethernet Switches

A-type LPUs, LS82GT20, and LS82GP20 do not support traffic-based selective

Execute the vlan-vpn enable command in the corresponding port view before

executing the traffic-remark-vlanid command.

The QinQ feature cannot be enabled on a port with Voice VLAN function enabled.

1.14.3 Configuration Example

A switch is connected to 10.1.1.1/24 network segment through its Ethernet 2/0/1

Tag all the frames from the 10.1.1.1/24 network segment with outer VLAN tags to

implement the traffic-based selective QinQ feature.

Configuration procedure:

<H3C> system-view

[H3C] vlan 25

[H3C-vlan25] quit

[H3C] acl number 2000

[H3C-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255

[H3C-acl-basic-2000] quit

[H3C] interface Ethernet2/0/1

[H3C-Ethernet2/0/1] port link-type hybrid

[H3C-Ethernet2/0/1] port hybrid vlan 25 untagged

[H3C-Ethernet2/0/1] vlan-vpn enable

[H3C-Ethernet2/0/1] qos

[H3C-qosb-Ethernet2/0/1]

remark-vlan 25

I. Network requirement

The enterprise network connects all the departments through the ports of the Ethernet

switch. The salary query server of the financial department is accessed through

Ethernet 2/0/1 with IP address 129.110.1.2. The network requirements are to limit the

average rate of outbound traffic within 640kbps and set the precedence of packets

exceeding the specification to 4.

traffic-remark-vlanid

Chapter 1 QoS Configuration

Table of Contents