Boot Rom Upgrade Configuration Example; Configuring Inter-Card Link State Adjustment; Introduction - H3C S7500 Series Operation Manual

Operation Manual – Hardware-Dependent Software Configuration
H3C S7500 Series Ethernet Switches
Caution:
If you do not specify a slot number in the boot bootrom command, the system
upgrades all normal boards in position by default.
After you specify the primary startup file for the next booting, the system upgrades
all normal boards in the process of upgrading Boot ROM. You need also to confirm
the upgrade operation in the upgrade process.

1.1.2 Boot ROM Upgrade Configuration Example

I. Network requirements
Use the current startup file to upgrade the Boot ROMs of all normal LPU boards in
position.
Use the specified App file (abcd.app) to upgrade the Boot ROMs of all normal
LPU boards in position.
Specify the App file abcd.app as the primary startup file for next booting and use it
to upgrade the Boot ROMs.
II. Configuration example
# Use the current startup file to upgrade the Boot ROMs of all normal LPU boards in
position.
<H3C> boot bootrom default
# Use the specified App file (abcd.app) to upgrade the Boot ROMs of all normal LPU
boards in position.
<H3C> boot bootrom abcd.app
# Specify the App file abcd.app as the primary startup file for next booting and use it to
upgrade the Boot ROMs.
<H3C> boot boot-loader primary abcd.app

1.2 Configuring Inter-Card Link State Adjustment

1.2.1 Introduction

The inter-card link state adjustment function is designed to improve the adaptability of
the inter-card links in an S7500 series switch. It enables you to set the mode in which
inter-card links are established as needed.
Chapter 1 Hardware-Dependent
1-2
Software Configuration