Ftp Configuration: A Switch Functioning As An Ftp Server - H3C S7500 Series Operation Manual

Operation Manual – FTP and TFTP
H3C S7500 Series Ethernet Switches
Device
FTP server

1.1.2 FTP Configuration: A Switch Functioning as an FTP Server

I. Prerequisites
A switch functions as an FTP server. A remote PC functions as an FTP client. The
network operates properly, as shown in
Switch Switch
Figure 1-1 Network diagram for FTP configuration
II. Configuration procedure
Follow these steps to configure an FTP server:
Enter system view
Enable the FTP server
function
Set the connection idle
time
Configuration
Enable the FTP server,
and configure user
names, passwords, and
the corresponding rights
Network Network
Network Network
To do... Use the command...
system-view
ftp server enable
ftp timeout minutes
Chapter 1 FTP and TFTP Configuration
Default
—
Figure 1-1.
PC PC
—
Required
By default, the FTP server
function is disabled.
Optional
The default connection idle
time is 30 minutes.
1-3
Description
—
Remarks