H3C S7500 Series Operation Manual page 58

Operation Manual – Login
H3C S7500 Series Ethernet Switches
Set the service type of the local user to Terminal.
Configure to authenticate users logging in through the console port in the scheme
mode.
The commands of level 2 are available to users logging into the AUX user
interface.
The baud rate of the console port is 19,200 bps.
The screen can contain up to 30 lines.
The history command buffer can store up to 20 commands.
The timeout time of the AUX user interface is 6 minutes.
II. Network diagram
User PC running Telnet
Figure 2-7 Network diagram for AUX user interface configuration (with the
authentication mode b
III. Configuration procedure
# Enter system view.
<H3C> system-view
# Create a local user named guest and enter local user view.
[H3C] local-user guest
# Set the authentication password to 123456 (in plain text).
[H3C-luser-guest] password simple 123456
# Set the service type to Terminal, with the user level being 2.
[H3C-luser-guest] service-type terminal level 2
[H3C-luser-guest] quit
# Enter AUX user interface view.
[H3C] user-interface aux 0
# Configure to authenticate users logging in through the console port in the scheme
mode.
[H3C-ui-aux0] authentication-mode scheme
Ethernet
eing scheme)
2-16
Chapter 2 Logging in through the Console Port
Ethernet1/0/1