H3C S7500 Series Operation Manual page 34

Operation Manual – CLI
H3C S7500 Series Ethernet Switches
clock
cluster
copy
debugging
delete
dir
display
<omitted>
2) Enter a command, a space, and a ? character (instead of a keyword available in
this position of the command) on your terminal to display all the available
keywords and their brief descriptions. The following takes the clock command as
an example.
<H3C> clock ?
datetime
summer-time
timezone
3) Enter a command, a space, and a ? character (instead of an argument available in
this position of the command) on your terminal to display all the available
arguments and their brief descriptions. The following takes the interface vlan
command as an example.
[H3C] interface vlan-interface ?
<1-4094>
[H3C] interface vlan-interface 1 ?
<cr>
The string <cr> means no argument is available in the position occupied by the ?
character. You can execute the command without providing any other information.
II. Partial online help
1) Enter a string followed directly by a ? character on your terminal to display all the
commands beginning with the string. For example:
<H3C> pi?
ping
2) Enter a command, a space, and a string followed by a ? character on your terminal
to display all the keywords that belong to the command and begin with the string (if
available). For example:
<H3C> display ver?
version
3) Enter the first several characters of a keyword in a command and then press
<Tab>, the complete keyword will be displayed on the terminal screen if the input
characters uniquely identify a keyword; all the keyword that match the input
characters will be displayed on the terminal screen if the input characters match
more than one keywords.
Specify the system clock
Run cluster command
Copy from one file to another
Enable system debugging functions
Delete a file
List files on a file system
Display current system information
Specify the time and date
Configure summer time
Configure time zone
VLAN interface number
1-13
Chapter 1 CLI Overview