H3C S7500 Series Operation Manual page 868

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches
Module name
RMON
RMX
RRPP
RSA
RTA
RTPRO
RXTX
SC
SHELL
SNMP
SOCKET
SSH
SYSM
SYSMIB
TAC
TELNET
TFTPC
TUNNEL
UDPH
USERLOG
VFS
VLAN
VRRP
VTY
default
Note that a slash (/) separates the module name and severity level.
5) Severity
Switch information falls into three categories: log information, debugging information
and trap information. The information center classifies each category of information into
eight levels by severity or emergency. The higher the information severity is, the
smaller the corresponding level is. For example, the "debugging" severity corresponds
to level 8, and the "emergencies" severity corresponds to level 1. If filtered by severity,
Description
Remote monitor module
IPX routing module
Rapid ring protection protocol module
Revest, Shamir and Adleman encryption module
L3+ plug-in card traffic accounting module
Routing protocol module
Lower layer packets receiving and transmitting module
Server control module
User interface module
Simple network management protocol module
Socket module
Secure shell module
System management module
System MIB module
Terminal access controller module
Telnet module
TFTP client module
Packets transparent transmission module
UDP helper module
User log module
Virtual file system module
Virtual local area network module
VRRP (virtual router redundancy protocol) module
VTY (virtual type terminal) module
Default settings for all the modules
1-4
Chapter 1 Information Center