H3C S7500 Series Operation Manual page 289

Operation Manual – MSTP
H3C S7500 Series Ethernet Switches
[H3C-Vlan10] quit
# Disable the STP feature on Ethernet2/0/1 and then enable the VLAN VPN function on
it.
[H3C] interface Ethernet 2/0/1
[H3C-Ethernet2/0/1] port access vlan 10
[H3C-Ethernet2/0/1] stp disable
[H3C-Ethernet2/0/1] vlan-vpn enable
[H3C-Ethernet2/0/1] quit
# Configure Ethernet2/0/2 as a trunk port.
[H3C] interface Ethernet 2/0/2
[H3C-Ethernet2/0/2] port link-type trunk
# Add the trunk port to all VLANs.
[H3C-Ethernet2/0/2] port trunk permit vlan all
4) Configure Switch D
# Enable MSTP.
<H3C> system-view
[H3C] stp enable
# Enable the VLAN-VPN tunnel function.
[H3C] vlan-vpn tunnel
# Add Ethernet2/0/2 to VLAN 10.
[H3C] vlan 10
[H3C-Vlan10] port Ethernet 2/0/2
# Disable STP on Ethernet2/0/2 and then enable the VLAN VPN function on it.
[H3C] interface Ethernet 2/0/2
[H3C-Ethernet2/0/2] port access vlan 10
[H3C-Ethernet2/0/2] stp disable
[H3C-Ethernet2/0/2] vlan-vpn enable
[H3C-Ethernet2/0/2] quit
# Configure Ethernet2/0/1 as a trunk port.
[H3C] interface Ethernet 2/0/1
[H3C-Ethernet2/0/1] port link-type trunk
# Add the trunk port to all VLANs.
[H3C-Ethernet2/0/1] port trunk permit vlan all
1-45
Chapter 1 MSTP Configuration