Software Features - H3C S7500 Series Operation Manual

Operation Manual – Overview
H3C S7500 Series Ethernet Switches
Chassis
S7506R
S7506R XGbus
[1]
: When an Salience III series engine is used together with an S7503 chassis (with no
XGbus silkscreen), you must use the product 7503 command in system view to
identify the device as an S7503 switch and then restart the switch.
[2]
: When a Salience III/Salience III Edge engine is used together with an S7506R
chassis (with no XGbus silkscreen), the four SFP interfaces on the engine will not work.

3.4 Software Features

The S7500 series provide rich software features, thus meeting the requirements of
different users.
Table 3-7 Software features of the S7500 series
Module
01-CLI
02-Login
03-Configuration
file management
04-VLAN
05-Extended VLAN
application
06-IP address-IP
performance-IPX
07-GVRP
08-QinQ
Engine
Salience III
[2]
√
√
Table 3-7 lists the software features in different modules.
Command line interface (CLI)
Hierarchical protection for commands
Online help for commands
Local login through the Console port
Telnet/SSH login through an Ethernet port
Modem login through the Console port
NMS Login
Saving/restoring/deleting configuration file
IEEE 802.1Q-compliant VLAN (virtual local area network)
Port-based VLAN
Protocol-based VLAN
Voice VLAN
isolate-user-VLAN
Super VLAN
IP address configuration of the switch
TCP attribute configuration of the switch
IPX (internetwork packet exchange)
GVRP (GARP VLAN registration protocol)
QinQ (that is, VLAN VPN)
Flexible QinQ
Salience III Plus
√
√
Features supported
3-5
Chapter 3 Product Overview
Salience III Edge
[2]
√
√