H3C S7500 Series Operation Manual page 934

Operation Manual – HWPing
H3C S7500 Series Ethernet Switches
[H3C] hwping-agent enable
# Create a HWPing test group, with the administrator name of administrator and the
test tag of icmp.
[H3C] hwping administrator icmp
# Specify the test type as ICMP.
[H3C-hwping-administrator-icmp] test-type icmp
# Specify the destination IP address as 1.1.1.99.
[H3C-hwping-administrator-icmp] destination-ip 1.1.1.99
# Set the number of test packets sent in a test to 10.
[H3C-hwping-administrator-icmp] count 10
# Set the timeout time of test operations to 5.
[H3C-hwping-administrator-icmp] timeout 5
# Enable the test operation.
[H3C-hwping-administrator-icmp] test-enable
# Display the test results.
[H3C-hwping-administrator-icmp] display hwping results administrator icmp
HWPing entry(admin administrator, tag icmp) test result:
Destination ip address: 1.1.1.99
Send operation times: 10
Min/Max/Average Round Trip Time: 2/5/2
Square-Sum of Round Trip Time: 66
Last complete test time: 2004-4-2 7:59:54.7
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[H3C-hwping-administrator-icmp] display hwping history administrator icmp
HWPing entry(admin administrator, tag icmp) history record:
Index Response Status
1 1
2 1
3 1
4 1
5 1
6 2
7 1
Chapter 1 HWPing Configuration
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
LasrRC
1 0 2004-11-25 16:28:55.0
1 0 2004-11-25 16:28:55.0
1 0 2004-11-25 16:28:55.0
1 0 2004-11-25 16:28:55.0
1 0 2004-11-25 16:28:55.0
1 0 2004-11-25 16:28:55.0
1 0 2004-11-25 16:28:55.0
1-4
Time