H3C S7500 Series Operation Manual page 495

Operation Manual – Multicast
H3C S7500 Series Ethernet Switches
[H3C-vlan12] port Ethernet 2/0/6 to Ethernet 2/0/7
[H3C-vlan12] quit
[H3C] interface Vlan-interface 12
[H3C-Vlan-interface12] pim sm
[H3C-Vlan-interface12] quit
# Configure candidate BSRs.
[H3C] pim
[H3C-pim] c-bsr Vlan-interface 10 30 2
# Configure candidate RPs.
[H3C] acl number 2000
[H3C-acl-basic-2000] rule permit source 225.0.0.0 0.255.255.255
[H3C] pim
[H3C-pim] c-rp Vlan-interface 10 group-policy 2000
# Configure PIM domain boundary.
[H3C] interface Vlan-interface 12
[H3C-Vlan-interface12] pim bsr-boundary
When VLAN-interface 12 is configured as the PIM domain boundary, LS_D cannot
receive BSR information from LS_B any more, that is, LS_D is excluded from the PIM
domain.
3) Configure LS_C
# Enable PIM-SM.
<H3C> system-view
[H3C] multicast routing-enable
[H3C] vlan 10
[H3C-vlan10] port Ethernet 2/0/2 to Ethernet 2/0/3
[H3C-vlan10] quit
[H3C] interface Vlan-interface 10
[H3C-Vlan-interface10] igmp enable
[H3C-Vlan-interface10] igmp enable
[H3C-Vlan-interface10] pim sm
[H3C-Vlan-interface10] quit
[H3C] vlan 11
[H3C-vlan11] port Ethernet 2/0/4 to Ethernet 2/0/5
[H3C-vlan11] quit
[H3C] interface Vlan-interface 11
[H3C-Vlan-interface11] pim sm
[H3C-Vlan-interface11] quit
[H3C] vlan 12
[H3C-vlan12] port Ethernet 2/0/6 to Ethernet 2/0/7
[H3C-vlan12] quit
7-21
Chapter 7 PIM Configuration