Console Port Login Configuration - H3C S7500 Series Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches
Figure 2-4 Set port parameters
3) Power on the switch. You will be prompted to press the Enter key if the switch
successfully completes POST (power-on self test). The prompt (such as <H3C>)
appears after you press the Enter key.
4) You can then configure the switch or check the information about the switch by
executing the corresponding commands. You can also acquire help by type the ?
character. The commands available on a switch are described in the command
manuals.

2.3 Console Port Login Configuration

2.3.1 Common Configuration
Table 2-2 lists the common configuration of console port login.
Chapter 2 Logging in through the Console Port
2-3