H3C S7500 Series Operation Manual page 342

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches
To do...
Enter system view
Configure OSPF
MIB binding
Enable OSPF Trap
Use the command...
system-view
ospf mib-binding process-id
snmp-agent trap enable ospf
[ process-id ] [ ifauthfail |
ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit |
lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifauthfail | vifcfgerror |
virifrxbadpkt |
virifstatechange |
viriftxretransmit |
virnbrstatechange ]*
4-24
Chapter 4 OSPF Configuration
Remarks
—
Optional
By default, MIB is bound
to the first enabled OSPF
process. When multiple
OSPF processes are
enabled, you can
configure to which OSPF
process the MIB is bound.
Optional
You can configure OSPF
to send diversified SNMP
TRAP messages and
specify a certain OSPF
process to send SNMP
TRAP messages by
process ID.