H3C S7500 Series Operation Manual page 540

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
The switch supports the integer mode and string mode of dynamic VLAN assignments
to adapt to authentication server. Different servers assign VLANs in different ways. You
are recommended to configure the switch based on the mode of dynamic VLAN
assignment used by the server.
for RADIUS server.
Table 1-8 Common VLAN assignment modes for RADIUS server
Server type
CAMS
ACS
FreeRADIUS
Shiva Access Manager
Steel-Belted Radius
Administrator
In actual applications, to use this feature together with Guest VLAN, set port control to
port-based mode.
Table 1-9 Configure dynamic VLAN assignment
Enter system view
Create an ISP domain
and enter its view
Set the VLAN assignment
mode
Create a VLAN and enter
its view
Set a VLAN name for
VLAN assignment
Table 1-8
Integer (For the latest version, whether the mode is
integer or string depends on attribute value.)
String
Determined by attribute value (A value of 100
represents the integer mode and a value of "100"
represents the string mode).
String
String
To do...
system-view
domain isp-name
vlan-assignment-mode
{ integer | string }
vlan vlan-id
name string
Chapter 1 AAA & RADIUS & HWTACACS
lists some common VLAN assignment modes
Dynamic VLAN assignment mode
Use the command...
1-18
Configuration
Remarks
—
—
Optional
By default, the VLAN
assignment mode is
integer.
—
This operation is required
if the VLAN assignment
mode is set to string.