Setting The System Name Of The Switch; Setting The Date And Time Of The System; Setting The Local Time Zone; Setting The Daylight Saving Time - H3C S7500 Series Operation Manual

Hide thumbs Also See for S7500 Series:

Table of Contents

Operation Manual – System Maintenance and Debugging

H3C S7500 Series Ethernet Switches

2.1.3 Setting the System Name of the Switch

Enter system view

Set the system name of

Set the current date and

time of the system

This configuration task is to set the name of the local time zone and the difference

between the local time zone and the standard UTC (universal time coordinated) time.

Follow the step to set the local time zone:

Set the local time zone

This configuration task is to set the name, time range (start time and end time), and

time offset of the daylight saving time. The operation here saves you from manually

adjust the system time.

When the system reaches the specified start time, it automatically adds the

specified offset to the current time, so as to toggle the system time to the daylight

saving time.

When the system reaches the specified end time, it automatically subtracts the

specified offset from the current time, so as to toggle the daylight saving time to

normal system time.

Follow the step to set the daylight saving time:

sysname sysname

clock datetime HH:MM:SS

clock timezone

zone-name { add |

minus } HH:MM:SS

Chapter 2 Basic System Configuration and

Use the command...

By default, the name is

By default, it is the UTC

Table of Contents