Telnet Configurations For Different Authentication Modes - H3C S7500 Series Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches
VTY terminal
configuration

3.1.2 Telnet Configurations for Different Authentication Modes

Table 3-3
Table 3-3 Telnet configurations for different authentication modes
Authentication
mode
None
Password
Configuration
Make terminal services
available
Set the maximum number
of lines the screen can
contain
Set history command
buffer size
Set the timeout time of a
user interface
lists Telnet configurations for different authentication modes.
Telnet configuration
Perform
common
configuration
Configure the
password
Perform
common
configuration
Chapter 3 Logging in through Telnet
Optional
By default, terminal services are
available in all user interfaces
Optional
By default, the screen can contain up
to 24 lines.
Optional
By default, the history command buffer
can contain up to 10 commands.
Optional
The default timeout time is 10 minutes.
Perform common
Telnet
configuration
Configure the
password for local
authentication
Perform common
Telnet
configuration
3-2
Description
Description
Optional
Refer to Table 3-2.
Required
Optional
Refer to Table 3-2.