Configuring To Assign Ip Addresses Of Dhcp Address Pools To Dhcp Clients - H3C S7500 Series Operation Manual

Operation Manual – DHCP
H3C S7500 Series Ethernet Switches
Follow these steps to configure to assign the IP addresses of interface address pools
to DHCP clients:
Enter system view
Configure to
assign the IP
addresses of
interface
address pools
to DHCP clients
2.3.4 Configuring to Assign IP Addresses of DHCP Address Pools to DHCP
Clients
You can assign IP addresses by static binding or assign IP addresses dynamically to
DHCP clients as needed.
I. Configuring to assign IP addresses by static binding
Some DHCP clients, such as WWW servers, need fixed IP addresses. This is
achieved by binding IP addresses to the MAC addresses of these DHCP clients.
When such a DHCP client applies for an IP address, the DHCP server finds the IP
address corresponding to the MAC address of the DHCP client, and then assigns the
IP address to the DHCP client.
Follow these steps to configure to assign IP addresses by static binding:
Enter system view
Enter interface view
Configure static binding
To do...
Configure
the current
interface
Configure
multiple
interfaces in
system view
To do...
system-view
interface interface-type
interface-number
dhcp server static-bind
ip-address ip-address
mac-address
mac-address
Chapter 2 DHCP Server Configuration
Use the command...
system-view
interface interface-type
interface-number
dhcp select interface
quit
dhcp select interface
{ interface interface-type
interface-number [ to
interface-type
interface-number ] | all }
Use the command...
2-11
Remarks
—
Required
By default, a DHCP
server assigns the
IP addresses of the
global address pool
to DHCP clients
Remarks
—
—
Required
By default, static binding
is not configured