Assistant Edge Node Configuration Example; Configuration Examples; Single Ring Network Configuration Example - H3C S7500 Series Operation Manual

Operation Mannual – RRPP
H3C S7500 Series Ethernet Switches

1.5.2 Assistant Edge Node Configuration Example

I. Network requirements
Define the switch as a node in RRPP domain 1.
Define VLAN 4092 as the control VLAN.
Define the switch as a transit node in primary ring 1 in RRPP domain 1, the port
GigabitEthernet 2/0/1 as the primary port, the port GigabitEthernet 2/0/2 as the
secondary port.
Define the switch as an assistant edge node on subring 2 in the RRPP domain 1,
the port GigabitEthernet 2/0/2 as the common port, and the port GigabitEthernet
2/0/4 as the edge port.
II. Configuration procedure
<H3C> system-view
[H3C] rrpp domain 1
[H3C-rrpp-domain1] control-vlan 4092
[H3C-rrpp-domain1] ring 1 node-mode transit primary-port GigabitEthernet2/0/1
secondary-port GigabitEthernet2/0/2 level 0
[H3C-rrpp-domain1]
GigabitEthernet 2/0/2 edge-port GigabitEthernet 2/0/4
[H3C-rrpp-domain1] ring 1 enable
[H3C-rrpp-domain1] ring 2 enable
[H3C-rrpp-domain1] quit
[H3C] rrpp enable
[H3C] display rrpp brief
[H3C] display rrpp verbose domain 1
[H3C] display rrpp statistics domain 1

1.6 Configuration Examples

1.6.1 Single Ring Network Configuration Example

I. Network requirements
Switch A, Switch B, Switch C and Switch D constitute RRPP domain 1.
VLAN 4092 is the control VLAN of RRPP domain 1.
Switch A, Switch B, Switch C and Switch D constitute primary ring 1.
Switch A serves as the master node of the primary ring, its GigabitEthernet 2/0/1 is
the primary port, and GigabitEthernet 2/0/2 is the secondary port.
Switch B, Switch C and Switch D are transit nodes of the primary ring. Their
respective GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 serve as the primary
and secondary ports.
The default values are used for the timers on the primary ring.
ring 2 node-mode
1-16
Chapter 1 RRPP Configuration
assistant-edge common-port