Boot Menu - H3C S7500 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Note:
The loading process of the Boot ROM software is the same as that of the host software,
except that during the former process, you should press <Ctrl+U> and <Enter> after
entering the Boot Menu and the system gives different prompts. The following text
mainly describes the Boot ROM loading process.

1.2.1 Boot Menu

Starting......
RAMLine.....OK
System is booting..........***..........
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date
CPU type
CPU Clock Speed : 300Mhz
BUS Clock Speed : 33Mhz
BOOT_FLASH type : M29W040B
Flash Size
Memory Size
S7506 main board self testing................................
SDRAM Data lines Selftest.................................OK!
SDRAM Address lines Selftest..............................OK!
SDRAM fast selftest.......................................OK!
Please check LEDs.....................LEDs selftest finished!
CPLD selftest.............................................OK!
FPGA selftest.............................................OK!
The switch Mac address is .....................0000.0309.0004
******************************************
*
* H3C S7506 BOOTROM, Version 530
*
******************************************
: Apr 2 2007, 20:08:58
: MPC8245
: 32MB
: 256MB
1-2
Chapter 1 Boot ROM and Host Software
*
*
*
Loading