H3C S7500 Series Operation Manual page 110

Operation Manual – VLAN
H3C S7500 Series Ethernet Switches
2.2.4 Protocol-based VLAN Configuration Example
I. Configuration requirements
Create VLAN 2 and VLAN 3 and specify the description string of VLAN 2 as home;
Add Ethernet 2/0/1 and Ethernet 2/0/2 to VLAN 2 and add Ethernet 2/0/3 and
Ethernet 2/0/4 to VLAN 3.
II. Network diagram
VLAN2
Figure 2-1 Network diagram for VLAN configuratio
III. Configuration procedure
# Create VLAN 2 and enter its view.
<H3C> system-view
[H3C] vlan 2
# Specify the description string of VLAN 2 as home.
[H3C-vlan2] description home
# Add Ethernet 2/0/1 and Ethernet 2/0/2 to VLAN 2.
[H3C-vlan2] port Ethernet2/0/1 Ethernet2/0/2
# Create VLAN 3 and enter its view.
[H3C-vlan2] vlan 3
# Add Ethernet 2/0/3 and Ethernet 2/0/4 to VLAN 3.
[H3C-vlan3] port Ethernet2/0/3 Ethernet2/0/4
2.3 Configuring a Protocol-Based VLAN
2.3.1 Creating Protocol Template for Protocol-Based VLAN
I. Configuration prerequisites
Create a VLAN before configuring a protocol-based VLAN.
II. Configuration procedure
Follow these steps to create protocol types of a VLAN:
To do...
Enter system view
Enter VLAN view
Eth2/0/1 Eth2 /0/3
Eth2/0 /2 Eth2/0/4
system-view
vlan vlan-id
VLAN 3
n
Use the command...
2-6
Chapter 2 VLAN Configuration
Remarks
—
Required