Configuration Procedure - H3C S7500 Series Operation Manual

Operation Manual – ACL
H3C S7500 Series Ethernet Switches

1.9.2 Configuration Procedure

Table 1-17 Apply an ACL on a port
To do...
Enter system view
Enter Ethernet port
view
Enter QoS view
Apply an ACL on the
port
Display information
about ACLs applied
to a port or all ports.
acl-rule: Applied ACL, which can be a combination of different types of ACL rules.
1-18 and
corresponding parameter description.
combinations on LPUs other than Type A and the corresponding parameter description.
Table 1-18 Combined application of ACLs on service Type A LPUs
Combination mode
Apply all rules in an IP type ACL
Apply one rule in an IP type ACL
Apply all rules in a link type ACL
Apply one rule in a link type ACL
Table 1-19 Combined application of ACLs on LPUs other than Type A.
Apply all rules in an IP type ACL
Apply one rule in an IP type ACL
Apply all rules in a link type ACL
Use the command...
system-view
interface interface-type
interface-number
qos
packet-filter { inbound |
outbound } acl-rule
[ system-index ]
[ not-care-for-interface ]
packet-filter inbound
acl-rule [ system-index ]
display acl
running-packet-filter { all
| interface interface-type
interface-number }
Table 1-20 describe the ACL combinations on Type A LPUs and the
Combination mode
—
—
—
Required
This command is supported by
Type A LPUs.
Required
This command is supported by
LPUs other than Type A.
Optional
This command can be
executed in any view.
Table 1-19 and
Form of acl-rule
ip-group { acl-number | acl-name }
ip-group { acl-number | acl-name } rule rule-id
link-group { acl-number | acl-name }
link-group { acl-number | acl-name } rule rule-id
Form of acl-rule
ip-group { acl-number | acl-name }
ip-group { acl-number | acl-name } rule
rule-id
link-group { acl-number | acl-name }
1-20
Chapter 1 ACL Configuration
Remarks
Table 1-20 describe the ACL
Table