Tftp Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – FTP and TFTP
H3C S7500 Series Ethernet Switches
Download a file through
TFTP
Upload a file through
TFTP
Enter system view
Specify the ACL adopted
when a switch attempts to
connect a TFTP server

1.2.3 TFTP Configuration Example

I. Network requirements
A switch functions as a TFTP client and a PC functions as a TFTP server.
The TFTP work directory is configured on the TFTP server.
The IP address of a VLAN interface on the switch is 1.1.1.1. The port through
which the switch connects with the PC belongs to the VLAN. The IP address of the
PC is 1.1.1.2.
The application named switch.bin is stored on the PC. Download it to the switch
through TFTP, and upload the configuration file named config.cfg to the work directory
on the PC to backup the configuration file.
II. Network diagram
Switch Switch Switch
Figure 1-5 Network diagram for TFTP configuratio
III. Configuration procedure
1) Start the TFTP server and configure the work directory on the PC.
2) Configure the switch.
# Log into the switch. (You can log into a switch through the Console port or by Telnet.
Refer to the "Login" part of this manual for detailed information.)
<H3C>
To do...
tftp { cluster | tftp-server } get
source-file [ dest-file ]
tftp { cluster | tftp-server } put
source-file [ dest-file ]
system-view
tftp-server acl acl-number
Network Network
Chapter 1 FTP and TFTP Configuration
Use the command...
PC PC
n
1-12
Remarks
Optional
Optional
—
Optional