Setting Voice Vlan Mode On A Port To Manual Mode - H3C S7500 Series Operation Manual

Operation Manual – Extended VLAN Application
H3C S7500 Series Ethernet Switches
Enable the voice VLAN
security mode
Set the aging time for the
voice VLAN
Enable the voice VLAN
function globally
Note:
If the voice VLAN of a device suffers a restart of the device during normal operation, in
order to make the established voice connection works normally, the system will add the
port whose voice VLAN mode is configured as automatic into the voice VLAN
automatically after the restart, instead of waiting for the trigger of voice traffic.

1.2.3 Setting Voice VLAN Mode on a Port to Manual Mode

Follow these steps to set the voice VLAN mode on a port to manual mode:
Enter system view
Enter port view
Enable the voice VLAN function
for the port
Set voice VLAN mode on the
port to manual mode
Return to system view
To do...
voice vlan security
enable
voice vlan aging minutes
voice vlan vlan-id enable
To do...
Chapter 1 Voice VLAN Configuration
Use the command...
Use the command...
system-view
interface interface-type
interface-number
voice vlan enable
undo voice vlan mode
auto
quit
1-5
Remarks
Optional
By default, the voice
VLAN security mode on
the port is enabled.
Optional
The default aging time is
1,440 minutes.
Required
Remarks
—
Required
Required
By default, the
voice VLAN
function is disabled
on a port.
Required
The default voice
VLAN mode on a
port is automatic.
—