Installing A Cf Card - H3C MSR5620 Manual
Hide thumbs
Also See for MSR5620:
- Command reference manual (389 pages) ,
- Replacement procedures (17 pages) ,
- Preparing for installation (8 pages)
Table of Contents
Advertisement
Figure 30 Installing an SPU-600-X1
3.
Insert the SPE into the slot on the SPU-600-X1 along the guide rails, and push the ejector
levers inward.
4.
Use a Phillips screwdriver to fasten the captive screws to secure the SPE to the SPU-600-X1.
Figure 31 Installing an SPE
Installing a CF card
The MSR5620 router does not support an external CF card.
The MPU-100 available for the MSR 56-60 and MSR 56-80 routers support an external CF card.
To install a CF card:
1.
Open the CF card cover by pressing the spring clip.
20
Advertisement
Table of Contents
