H3C S7500 Series Operation Manual page 729

Operation Manual – Mirroring
H3C S7500 Series Ethernet Switches
II. Configuring port mirroring in Ethernet port view
Enter system view
Create a port mirroring
group
Enter Ethernet port view
of the destination port
Define the current port as
the destination port
Exit current view
Enter Ethernet port view
of the source port
Configure the source port
and specify the direction
of the packets to be
mirrored
Display parameter
settings of the mirroring
III. Configuring port mirroring in system view
Enter system view
Create a port mirroring
group
Configure the destination
port
Configure the source port
and specify the direction
of the packets to be
mirrored
Display parameter
settings of the mirroring
To do...
system-view
mirroring-group group-id
local
interface interface-type
interface-number
mirroring-group group-id
monitor-port
quit
interface interface-type
interface-number
mirroring-group group-id
mirroring-port { both |
inbound | outbound }
display mirroring-group
{ all | local }
To do...
system-view
mirroring-group group-id
local
mirroring-group group-id
monitor-port
monitor-port
mirroring-group group-id
mirroring-port
mirroring-port-list { both |
inbound | outbound }
display mirroring-group
{ all | local }
Use the command...
Use the command...
1-6
Chapter 1 Mirroring Configuration
Remarks
—
Required
—
Required
LACP and STP must be
disabled on the
destination port
—
—
Required
Required
This command can be
executed in any view.
Remarks
—
Required
Required
LACP and STP must be
disabled on the
destination port.
Required
Optional
This command can be
executed in any view.