H3C S7500 Series Operation Manual page 737

Operation Manual – Mirroring
H3C S7500 Series Ethernet Switches
II. Configuration procedure
Enter system view
Create a mirroring group
Define the destination port
Enter Ethernet port view
of the source port
Enter QoS view
Reference ACLs for
identifying traffic flows
and perform traffic
mirroring for packets that
match.
Display the parameter
settings of traffic mirroring
Display all QoS settings of
a port
acl-rule: Applied ACL rules, which can be the combination of different types of ACL
rules. The following table describes the ACL combinations.
Table 1-3 Combined application of ACLs on type A LPUs.
Apply all rules in an IP type ACL
Apply one rule in an IP type ACL
Apply all rules in a link type ACL
Apply one rule in a link type
To do...
system-view
mirroring-group group-id
local
mirroring-group group-id
monitor-port
monitor-port
interface interface-type
interface-number
qos
mirrored-to inbound
acl-rule [ system-index ]
{ interface interface-type
interface-number |
mirroring-group
group-id }
display qos-interface
[ interface-type
interface-number ]
mirrored-to
display qos-interface
[ interface-type
interface-number ] all
Combination mode
Use the command...
Form of acl-rule
ip-group { acl-number | acl-name }
ip-group { acl-number | acl-name } rule
rule-id
link-group { acl-number | acl-name }
link-group { acl-number | acl-name } rule
rule-id
1-14
Chapter 1 Mirroring Configuration
Remarks
—
Required
Required
LACP and STP cannot be
enabled on the
destination port.
—
—
Required
Optional
These commands can be
executed in any view.