Enabling Information Output To The Trap Buffer - H3C S7500 Series Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches
To do...
Enter system view
Enable the
information center
Enable information
output to the log
buffer
Define an
information source
Set the format of
time stamp
Note:
To view debugging information of specific modules, you need to set the information
type to debug in the info-center source command, and enable debugging on
corresponding modules using the debugging command as well.

1.2.5 Enabling Information Output to the Trap Buffer

Follow these steps to enable information output to the trap buffer:
To do...
Enter system view
Enable the
information center
Use the command...
system-view
info-center enable
info-center logbuffer
[ channel { channel-number |
channel-name } | size
buffersize ]* [ | exclude
regular-expression ]
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Use the command...
system-view
info-center enable
1-11
Chapter 1 Information Center
Remarks
—
Optional
By default, the information
center is enabled.
Optional
By default, the switch
uses information channel
4 to output log information
to the log buffer, which
can holds up to 512 items
by default.
Required
Optional
This is to set the time
stamp format for
log/debugging/trap
information output.
This determines the time
stamp viewable to users.
Remarks
—
Optional
By default, the information
center is enabled.