Advanced 802.1X Configuration; Prerequisites; Configuring Proxy Detection - H3C S7500 Series Operation Manual

Operation Manual – 802.1x
H3C S7500 Series Ethernet Switches

1.5 Advanced 802.1x Configuration

Advanced 802.1x configurations, as listed below, are all optional.
CAMS cooperation configuration, including detecting multiple network interface
cards or proxy server;
Client version checking configuration;
DHCP-triggered authentication;
Guest VLAN configuration.

1.5.1 Prerequisites

Configuration of basic 802.1x

1.5.2 Configuring Proxy Detection

This function needs the support of 802.1x client program and CAMS, as listed below.
The 802.1x clients must be able to check a supplicant system uses multiple
network cards, proxy server, or IE proxy server to log in.
CAMS enables the function of disabling multiple network interface cards, proxy
server, or IE proxy server on the authenticator system.
By default, the 802.1x client disables the function of disabling multiple network interface
cards, proxy server, and IE proxy server. If you specify CAMS to enable the function,
CAMS will notify the 802.1x client that it should enable the function when a user passes
the authentication.
Table 1-3 Configure proxy detection
Enter system view
Enable the proxy
detection function
Enable proxy detection
for the specified ports
To do...
system-view
dot1x supp-proxy-check { logoff |
trap }
In system view:
dot1x supp-proxy-check { logoff |
trap } [ interface interface-list ]
In port view:
dot1x supp-proxy-check { logoff |
trap }
Use the command...
1-16
Chapter 1 802.1x Configuration
Remarks
—
Required
Disabled by default
Required
Disabled by default