H3C S7500 Series Operation Manual page 213

Operation Manual – Port Isolation
H3C S7500 Series Ethernet Switches
II. Network diagram
PC2
Figure 1-1 Network diagram for port isolation configuratio
III. Configuration procedure
# Create isolation group 1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] port-isolate group 1
# Add Ethernet 2/0/2, Ethernet 2/0/3, and Ethernet 2/0/4 to the isolation group 1.
[H3C-port-isolate-group1] port Ethernet2/0/2 to Ethernet2/0/4
# Display information about the ports in the isolation group.
[H3C-port-isolate-group1] display isolate port
Isolate group ID: 1
Isolated port(s) in group 1:
Internet
Et h2/ 0 /1
Switch
Eth2/0 /2 Et h2/ 0/4
Eth2 /0/ 3
PC3
Ethernet2/0/2 Ethernet2/0/3
Chapter 1 Port Isolation Configuration
PC4
Ethernet2/0/4
1-3
n