Displaying Hwping Configuration; Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – HWPing
H3C S7500 Series Ethernet Switches
Configure
the test
parameters
Execute the test

1.2.3 Displaying HWPing Configuration

Display the information of
HWPing test history
Display the latest HWPing
test results

1.2.4 Configuration Example

I. Network requirements
Perform a HWPing ICMP test between two switches. Like a ping test, this test uses
ICMP to test the roundtrip time of data packets between the source and the destination.
II. Configuration procedure
# Enable the HWPing client.
<H3C> system-view
System View: return to User View with Ctrl+Z.
To do...
Configure the
destination IP
address of the test
Configure the type
of the test
Configure the
packet sending
times in each test
Configure the
automatic test
interval
Configure the
timeout time of the
test
To do...
display hwping history
[ administrator-name operation-tag ]
display hwping results
[ administrator-name operation-tag ]
Chapter 1 HWPing Configuration
Use the
command...
destination-ip
ip-address
test-type type
count times
frequency
interval
timeout time
test-enable
Use the command...
1-3
Remarks
Required
By default, no destination
IP address is configured.
Optional
By default, the test type is
ICMP.
Optional
By default, the packet
sending times in each test
is 1.
Optional
By default, the automatic
test interval is zero, that
is, no automatic test is
performed.
Optional
By default, the timeout
time is 3 seconds.
Required
Remarks
Available in
any view